Educational Seminars and Training Courses
Sage Designs offers factory-certified training on Control Microsystems’ SCADAPack line of controllers, ClearSCADA HMI/SCADA software, and National Instruments’ Lookout HMI/SCADA software.
Tony Sannella, President of Sage Designs, has lectured widely on the topic of the design of Open Architecture SCADA Systems at California Polytechnic University's Irrigation Training & Research Center (ITRC), the Instituto Mexicano de Tecnología del Agua (IMTA), and at numerous Instrument Society of America (ISA) and California water association conferences, such as those sponsored by ACWA, CA-AWWA, and CWEA.
SCADA & Security Seminars
Sage Designs’ series of free SCADA & Security Seminars focus on relaying technical data on many facets of SCADA and Security products. Often highlighting a narrow specialty such as communication protocols, our seminars are excellent sources of information whether or not you use our products. Visit our Events Page for upcoming seminars and courses.
Training Services
 |
Control Microsystems’ Factory-certified
SCADAPack & ClearSCADA |
• Intro to TelePACE Studio Programming Environment & Configuration from Sage Designs
On-site Training. Ask for Quote.
• SCADAPack Controller & TelePACE Studio Ladders Programming Course
Sage Designs Inc. offers Factory-certified training for Control Microsystems’ SCADAPack line of controllers. This 3-day course covers the basics of using the TelePACE Studio Ladder Logic Editor and the fundamentals of Ladder Logic Programming, as it applies to the SCADAPack line of SCADA-optimized PLCs and RTUs. The third day is devoted to advanced controller communications features.
3-Day TelePACE Studio Course
On-site TelePACE Studio Course
|
$1,275
Ask for Quote |
|
 |
ClearSCADA HMI/SCADA Software Training |
4-Day ClearSCADA Course
On-site ClearSCADA Training |
$1,800
Ask for Quote |
|
 |
DNP3 Protocol Training |
2-Day DNP3 Protocol Course
On-site DNP3 Protocol Training |
$-TBA-
Ask for Quote |
|
|
SCADA Basics |
1-day Course
Designed for individuals getting ready to engineer and implement a new, or upgrade an existing, SCADA system. |
Ask for Quote
|
|
Systems Integrators
Find out about free training available for qualified Systems Integrators.
Customized On-site Lookout Training
 |
National Instruments’ Certified
Lookout™ HMI/SCADA |
Sage Designs, Inc. offers NI-certified instruction for Lookout™ HMI/SCADA Software designed specifically to address the use of Lookout in SCADA applications. This class is offered at our San Francisco Bay Area office, and is also available as an on-site course at a customer’s facility. We teach the NI Lookout Basics 2-Day Hands-On Course and provide customized on-site training.
Lookout Training
2-Day and 3-Day On-Site Lookout Training Courses are offered by Sage Designs, Inc. Also available are On-Site Training & Application Assistance customized for your specific needs. This class is offered at our San Francisco Bay Area office, and is also available as an on-site course at a customer’s facility. All courses are provided by a National Instruments’ Certified Lookout Instructor. Ask for Quote.
Customized On-site Training
Sage Designs, Inc. can provide on-site training customized to your specific needs. Ask for quote.
Referrals to Qualified SCADA Systems Integrators & Engineers
Although Sage Designs, Inc. is not a consulting firm, we seek to educate our customer base by providing referrals to qualified third-party systems integration and engineering firms who may assist them in their areas of expertise. Some of our product lines, such as Control Microsystems and Specter Instruments, also offer their own qualified systems integrator programs which can be reviewed on their respective web sites.
|
